|

---
Clean3
is a product from

tel
+33 (0)2 97 437690
fax
+33 (0)2 97 545016
Clean3
is a strategic activity of
Groupe
Méaban
|
 |
|
the
biological
degreasing
fountain
|
|
|
instructions
: description
of the equipment |
|
|
click
on the image
to read the description of each Clean3 element
|
 |
|
|
|
|
|
|
|
|

|
Fountain
Depth : 750 mm
Width: 950 mm
Height 1050 mm
Weight when empty : 32 kg
|

|
Sink
- degreasing area
upper part : 630 x 400 mm
bottom part : 820 x 480 mm
heigth : 300 mm
- Grating
-themoplastic resin working area
- 2 part
siphon
- Filter
:
- 2 mechanical filtrations(1 at 450 µ), prevent sedimentation
of mineral sludge from forming at the bottom of the tank
- a bacterial filtering drain
- a
handle connected up to a supplying pump: 3 interchangeable
brushes
- Brush
holder
|
|


|
Tank
thermoplastic resin, which can withstand
up to 200 Kg
Depth : 600 mm
Width : 900 mm
Height : 900 mm
- minimum quantity of CleanBooster
(degreasing solution): 60 litre
- optimum quantity of CleanBooster : 80 litre
- maximum quantity of CleanBooster : 100 litre
- a 25
W immersed pump supplies the brush
- a 25
W pump supplies the filtering drain
- A 1000
W heating resistor
- Two
temperature probes and a relay probe check the temperature
(protection at 50°C)and level of fluid.
- A buzzer
warns when more product should be added.
Electric
torch
- 220-230
V - 50 HZ,
- fuse
5 x 20 ; 6.3 A
- buzzer
(to check the level)
- emergency
stop
- manual
starter
- external
control case
|
|
| |
|
|
|

|
- up
to 120 litre
- removable
thermoplastic grating floor
- essential
to retain potential splashes
|
|
| |
|
|
the
bacterial filtering drain
|
|
|
|

|
- filtering
drain (polyethylene 150 µ) , seeded with non pathogenic
aerobic mesofilic bacteria feeding on petroleum particles
- effective
surface area : 2.25 m²
- support
net
- aluminium
packaging bag for the recovery of the filtering drain after
use
- bucket
with a capacity of 4 used filters
- length
of use: 45 days
- update
: 2 years
- it
will not get blocked
|
|
| |
|
| |
|
|
Packaged
in 20 litre Bag-in-Box ( optimised packaging for recycling :
5 times less bulky, and can be slectively separated)
- powerful
degreasing solution based on surfactants
- contains
no solvent, nor oil base
- aqueous
based solution neutral pH (6,9)
- contains
nutrients facilitating the bioregulation
- anti-corrosive
(best mark at anti-corrosive test :PSA d631265méthod)
- temperature
of use: 33°C
- time
of drying : fast, equal to hydrocarbon solvents with flash
point 40°C
- non
toxic : not submitted to any reglementary labelling
- completely
non flammable, no flash point
- no
VOC
- if
disposal is required: an aqueous based procedure is followed
|
|
|
|
|
| |
|
| |
|
| |
|
|